Search
Connect a Device
EventsPartners

Upcoming Webinar: How to collect data from IoT sensors using Golioth and Modus Toolbox™

Read More
Mike Szczys
Mike Szczys
184
0

Please join us on Wednesday, April 19th 2023 for a webinar about using Golioth to collect IoT sensor data. The session will detail how to use the Infineon ModusToolbox™ to add Golioth device management.

This webinar will include Golioth team members alongside Clark Jarvis, a Senior Staff Technical Marketer at Infineon Technologies. He will present an overview of ModusToolbox™, the software support tool that helps combine and configure multiple repositories into a single embedded device firmware project. We’ll then demonstrate how to get a PSOC™ 6 connected via WiFi and streaming IoT sensor data back to Golioth.

What to Expect from this Webinar

As always, Golioth loves to present dynamic and interactive webinars. (No one will be reading Powerpoint slides in a monotone voice here!) The session will cover:

  • An overview on using ModusToolbox™
  • How to add software libraries with ModusToolbox™
  • How to use Golioth SDK functions to send time-series and stateful data to the cloud
  • How to view and interact with IoT data on the cloud-side
  • An overview on techniques for building scalable IoT Fleets

Sign up now!

This webinar is at 12 pm EDT / 9 am PDT on April 19th, 2023. If you can’t make it the day of, you can still still sign up to access the on-demand content. Those who attend will have an opportunity to ask questions towards the end of the presentation.

 

Previous article
IoT Air Quality Monitor: A Golioth Reference Design
Next article
Cold Chain Asset Tracker: A Golioth Reference Design
Mike Szczys
Mike Szczys
Mike is a Firmware Engineer at Golioth. His deep love of microcontrollers began in the early 2000s, growing from the desire to make more of the BEAM robotics he was building. During his 12 years at Hackaday (eight of them as Editor in Chief), he had a front-row seat for the growth of the industry, and was active in developing a number of custom electronic conference badges. When he's not reading data sheets he's busy as an orchestra musician in Madison, Wisconsin.

Post Comments

No comments yet! Start the discussion at forum.golioth.io

More from this author

Programming

Provisioning Devices over NFC

There are a hundred ways to provision a device, and with this NFC-based hack day project there are now 101. Follow along as we us a Nordic nRF53 as a writable NFC tag that parses the NDEF message, locates PSK-ID and PSK, then stores those credentials to add the device to an IoT fleet.
Mike Szczys -
Read
Hardware

Use your J-Link Programmer as a Serial Port for your Device

If you're already using a J-Link programmer in your embedded development, you can use it to interface directly with the target device serial port over the J-Link USB connection. This is extremely handy, especially if your hardware design connects RX/TX pins to the programming header.
Mike Szczys -
Read
How To

Guide to Securely Store Credentials on an nRF91 Modem

The Nordic nRF91 modems include secure storage for TLS credentials. This may be used to authenticate with Golioth. The assets are stored separately from the firmware, and once written, they cannot be read back from the device. This guide shows the process of storing and using credentials.
Mike Szczys -
Read

Related posts

Partners

Enhanced IoT Dashboards with Golioth, InfluxDB, and Grafana

We co-hosted a webinar with InfluxDB demonstrating how Golioth Pipelines make it simple to stream data from a microcontroller with...
Dylan Swartz -
spot_img

Latest posts

Provisioning Devices over NFC

Mike Szczys - 0
There are a hundred ways to provision a device, and with this NFC-based hack day project there are now 101. Follow along as we us a Nordic nRF53 as a writable NFC tag that parses the NDEF message, locates PSK-ID and PSK, then stores those credentials to add the device to an IoT fleet.

Unwrapping Certificates

Trond Snekvik - 0
Certificates are the most secure way to connect your device to the cloud. This article reduces confusion surrounding them with simple examples.

A Device That Can’t Be Updated Is a Device That Can’t Be Trusted

Dylan Swartz - 0
Over-the-air updates are a crucial part of building and deploying secured devices, yet many product companies skip this step. This post outlines why it's difficult and how Golioth is making it easier.

Want to stay up to date with the latest news?

Subscribe to our newsletter and get updates every 2 weeks. Follow the latest blogs and industry trends.

Learn how to develop enterprise-grade IoT on the Golioth blog.

Latest Posts

Provisioning Devices over NFC

Mike Szczys - 0
There are a hundred ways to provision a device, and with this NFC-based hack day project there are now 101. Follow along as we us a Nordic nRF53 as a writable NFC tag that parses the NDEF message, locates PSK-ID and PSK, then stores those credentials to add the device to an IoT fleet.

Unwrapping Certificates

Trond Snekvik - 0
Certificates are the most secure way to connect your device to the cloud. This article reduces confusion surrounding them with simple examples.

A Device That Can’t Be Updated Is a Device That Can’t Be Trusted

Dylan Swartz - 0
Over-the-air updates are a crucial part of building and deploying secured devices, yet many product companies skip this step. This post outlines why it's difficult and how Golioth is making it easier.

Most Popular

Debugging Zephyr for Beginners: printk() and the Logging Subsystem

Mike Szczys - 0
Zephyr has a number of tools to aid in debugging during your development process. Today we're focusing on the most available and widely useful...

Program your microcontrollers from WSL2 with USB support

Jonathan Beri - 0
Microsoft has finally added USB support to WSL and I’ve been testing this long-awaited feature as part of my Windows development workflow. Today I will walk you through the basic steps of programming an embedded device over USB using WSL.

How to Configure VS Code for Zephyr Development

Mike Szczys - 0
Jonathan Beri (CEO and founder of Golioth) gave a talk at the 2023 Embedded Open Source Summit about how to optimize VS Code for any Zephyr project.

Fast Access

© Golioth | All rights reserved