Nothing Found

Sorry, no posts matched your criteria

Golioth is at the Embedded Open Source Summit Next Week!

Golioth will be showcasing hardware running Zephyr at the Embedded Open Source Summit in Prague next week (June 27-29).

Zephyr Devicetree Troubleshooting: Generated Files

Learning Devicetree is one of the more difficult parts of getting comfortable with Zephyr. This post walks you through an example error and points out things to check while troubleshooting.
,

Golioth trains future Zephyr engineers

Golioth just wrapped another Zephyr training session that was open to the public. This was a group of 30 trainees, all remote. There continue to be challenges with remote training, but we are always refining how we train engineers and will detail…
Golioth Sensors Converge

Golioth Hardware at Sensors Converge Conference

Golioth is showcasing at the Sensors Converge Booth as part of Digikey's booth. Stop by to see how Golioth can connect a wide range of hardware using one codebase in Zephyr.

Ovyl + Golioth Case Study

Golioth ran a recent case study about Ovyl, a Nashville based product development shop.
,

Adding PWM sound in Zephyr

Utilize Zephyr PWM capabilities to drive a simple piezoelectric speaker to play notes. Golioth did this on the Nordic Semiconductor Thingy91 and can play selected songs over a cellular connection.

DC Power Monitor: A Golioth Reference Design

How full is your battery? How much current is your USB device drawing? What is your energy usage of your bank of devices? Gaining granular feedback on your electricity usage is a valuable tool. We have previously discussed this as part of…
,

How to Get Network Information from a Nordic nRF9160 Cellular Modem

Cellular-enabled devices are often deployed into far-flung locations. They are quite likely to be out of reach from physical access once deployed. Having a way to verify the network status for a device is really important to maintaining a fleet. Nordic…
,

Free Zephyr Training Hosted By Golioth, June 7th 2023

Golioth continues to run training for hardware and firmware developers looking to learn more about Zephyr and connecting their devices to the cloud; our last public training had 30 engineers trying out Zephyr and Golioth on accessible IoT hardware. Our…
,

Try out Golioth with a pre-compiled binary on the Thingy91

Try out the Golioth platform without writing or compiling any code. The newly released Thingy91 binary showcases the entire platform and guides users on how to structure their programs for success.