HomePlatform

Platform

Using VScode for ESP-IDF and Golioth

You can use VScode when working with Golioth's ESP-IDF SDK. This guide walks through the process of setting up the ESP-IDF extension for VScode, then shows how to build, flash, and run the golioth-basics example application.

How to optimize power in Celluar IoT deployments (with Jared Wolff)

How do you ensure you achieve the lowest possible power with your Cellular IoT Devices? We held a webinar on January 18th, 2023 where we tackled this question.

Move over Internet of Things, I built the Internet of Memes

These internet-connected ePaper devices are on the desk of every Golioth employee. Now we can upload memes to them all.

Golioth Ran My Furnace This Christmas

When the chips were down (or more accurately: out of stock), Mike took a Golioth Reference Design and used it to control the heat in his house and extend the capabilities of his HVAC system.

How to Debounce Button Inputs in a Real Time Operating System

Golioth ambassador Luis Ubieda explains how to debounce buttons in Zephyr and the tradeoffs between different hardware and software debounce methodology.

IoT Greenhouse Controller: A Golioth Reference Design

The Internet of Things (IoT) can make existing infrastructure more useful and easier to operate, with the...

Golioth Certificate-Based Authentication

Certificates ensure secure connection between device and cloud, from provisioning until decommissioning. Today we are announcing the ability to use Certificates with the Golioth platform.

Zephyr’s New ZBus Feature with Rodrigo Peixoto

Zephyr recently merged the ZBus feature, which creates an event-driven bus architecture on embedded devices. Rodrigo Peixoto joins Chris to talk about where it's a good fit and how the ZBus works.

Want to stay up to date with the latest news?

We would love to hear from you! Please fill in your details and we will stay in touch. It's that simple!