Webinars Archives - The Golioth Developer Blog https://blog.golioth.io/category/zephyr/webinars/ Golioth, Zephyr, and IoT Development News and How Tos Tue, 03 Jun 2025 14:07:38 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://blog.golioth.io/wp-content/uploads/2023/09/cropped-Golioth_Symbol_Coral_RGB-1-32x32.png Webinars Archives - The Golioth Developer Blog https://blog.golioth.io/category/zephyr/webinars/ 32 32 Upcoming webinar: Batteryless Cellular IoT with Conexio https://blog.golioth.io/upcoming-webinar-batteryless-cellular-iot-with-conexio/ Tue, 03 Jun 2025 14:24:03 +0000 https://blog.golioth.io/?p=9599 We’re excited to be hosting a new webinar coming up on June 18th at Noon ET / 9 am PT with Rajeev Piyare of Conexio Technologies. They are a new Golioth Design Partner and the creators of the Stratus Pro development board, based on the Nordic Semiconductor nRF9151. Problem space The problem is the same […]

The post Upcoming webinar: Batteryless Cellular IoT with Conexio appeared first on The Golioth Developer Blog.

]]> Custom Board, Custom Zephyr Devicetree (AirTag Session 3) https://blog.golioth.io/custom-board-custom-zephyr-devicetree-airtag-session-3/ Tue, 20 May 2025 14:44:49 +0000 https://blog.golioth.io/?p=9564 Sign up for the AirTag Clone webinar series to watch Golioth build out board definition files for the Orleon board, a Bluetooth sensor platform/playground. The upcoming session on May 23rd will walk through setting up all required build files.

The post Custom Board, Custom Zephyr Devicetree (AirTag Session 3) appeared first on The Golioth Developer Blog.

]]> Enhanced IoT Dashboards with Golioth, InfluxDB, and Grafana https://blog.golioth.io/enhanced-iot-dashboards-with-golioth-influxdb-and-grafana/ Thu, 30 Jan 2025 16:07:07 +0000 https://blog.golioth.io/?p=8779 We co-hosted a webinar with InfluxDB demonstrating how Golioth Pipelines make it simple to stream data from a microcontroller with environmental sensors directly into a production InfluxDB database. Using the example of a greenhouse monitor, we showed how to collect temperature and humidity data from sensors, stream it into InfluxDB, and then visualize and set […]

The post Enhanced IoT Dashboards with Golioth, InfluxDB, and Grafana appeared first on The Golioth Developer Blog.

]]> Build Before Installing: Zephyr Dev Environment Using GitHub Codespaces https://blog.golioth.io/build-before-installing-zephyr-dev-environment-using-codespaces/ https://blog.golioth.io/build-before-installing-zephyr-dev-environment-using-codespaces/#comments Thu, 09 May 2024 14:24:25 +0000 https://goliothblogdev.wpenginepowered.com/?p=7066 Golioth Firmware Engineer Mike Szczys describes how we use GitHub Codespaces and Development (Dev) Containers to train engineers all over the world without any install required. Answering the question of how fast can a new Zephyr RTOS user go from zero to successful code compilation.

The post Build Before Installing: Zephyr Dev Environment Using GitHub Codespaces appeared first on The Golioth Developer Blog.

]]> https://blog.golioth.io/build-before-installing-zephyr-dev-environment-using-codespaces/feed/ 3 Using VScode for ESP-IDF and Golioth https://blog.golioth.io/using-vscode-for-esp-idf-and-golioth/ Tue, 31 Jan 2023 15:07:45 +0000 https://goliothblogdev.wpenginepowered.com/?p=3921 You can use VScode when working with Golioth's ESP-IDF SDK. This guide walks through the process of setting up the ESP-IDF extension for VScode, then shows how to build, flash, and run the golioth-basics example application.

The post Using VScode for ESP-IDF and Golioth appeared first on The Golioth Developer Blog.

]]> How to optimize power in Celluar IoT deployments (with Jared Wolff) https://blog.golioth.io/how-to-optimize-power-in-celluar-iot-deployments-with-jared-wolff/ Thu, 26 Jan 2023 16:12:20 +0000 https://goliothblogdev.wpenginepowered.com/?p=3910 How do you ensure you achieve the lowest possible power with your Cellular IoT Devices? We held a webinar on January 18th, 2023 where we tackled this question.

The post How to optimize power in Celluar IoT deployments (with Jared Wolff) appeared first on The Golioth Developer Blog.

]]> The 12 Layers of IoT https://blog.golioth.io/the-12-layers-of-iot/ Thu, 12 Jan 2023 19:11:31 +0000 https://goliothblogdev.wpenginepowered.com/?p=3820 When I started at Golioth, I wanted to understand the service offerings from different companies in the space. What resulted, was a chart (below), slideshow (below), and a presentation I have now given a couple different times (video, above). All of these things showcase how I started to investigate and understand the inter-operating pieces of […]

The post The 12 Layers of IoT appeared first on The Golioth Developer Blog.

]]> IoT Greenhouse Controller: A Golioth Reference Design https://blog.golioth.io/iot-greenhouse-controller-a-golioth-reference-design/ Thu, 15 Dec 2022 16:17:01 +0000 https://goliothblogdev.wpenginepowered.com/?p=3692 The Internet of Things (IoT) can make existing infrastructure more useful and easier to operate, with the added benefit that you don’t need to be on-site to make changes. This is the case with Golioth’s latest reference design: a greenhouse controller that adjusts ventilation and grow lighting based on sensor readings. It also provides manual […]

The post IoT Greenhouse Controller: A Golioth Reference Design appeared first on The Golioth Developer Blog.

]]> How To Visualize A “Fleet View” For Your IoT Deployment https://blog.golioth.io/how-to-visualize-a-fleet-view-for-your-iot-deployment/ Thu, 01 Dec 2022 15:57:54 +0000 https://goliothblogdev.wpenginepowered.com/?p=3596 As you add more devices to your IoT deployment, you want to know all of their statuses at once. We show you how to create a custom "fleet view" dashboard using Grafana.

The post How To Visualize A “Fleet View” For Your IoT Deployment appeared first on The Golioth Developer Blog.

]]> Thousands of ESP32s: Device Management for ESP-IDF based devices https://blog.golioth.io/thousands-of-esp32s-devcon22/ Tue, 15 Nov 2022 16:04:49 +0000 https://goliothblogdev.wpenginepowered.com/?p=3366 DevCon22 was a 2 day event that Espressif held last month to showcase upcoming products from Espressif as well as external partner offerings. Mike and I (Chris), gave a talk about how  the Espressif IoT Development Framework (ESP-IDF) makes it really easy to add Golioth to your IoT projects. The ESP32 line of Wi-Fi based […]

The post Thousands of ESP32s: Device Management for ESP-IDF based devices appeared first on The Golioth Developer Blog.

]]>