Raspberry Pi Archives - The Golioth Developer Blog https://blog.golioth.io/tag/raspberry-pi/ Golioth, Zephyr, and IoT Development News and How Tos Wed, 12 Nov 2025 15:54:17 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://blog.golioth.io/wp-content/uploads/2023/09/cropped-Golioth_Symbol_Coral_RGB-1-32x32.png Raspberry Pi Archives - The Golioth Developer Blog https://blog.golioth.io/tag/raspberry-pi/ 32 32 Building Zephyr for the Raspberry Pi Pico2 W https://blog.golioth.io/building-zephyr-for-the-raspberry-pi-pico2-w/ Tue, 11 Nov 2025 15:04:08 +0000 https://blog.golioth.io/?p=10292 The Raspberry Pi Pico2 W is the one with a microcontroller and Wi-Fi. When most people think of Raspberry Pi as a single-board computer running Linux, this model is a microcontroller with a slew of impressive peripherals. While the original Pico (based on the RP2040) has had Zephyr support for a long time, the Pico2 […]

The post Building Zephyr for the Raspberry Pi Pico2 W appeared first on The Golioth Developer Blog.

]]> How Golioth Built a User Interface with ePaper and Back-lit LEDs for Our IoT Hardware https://blog.golioth.io/how-golioth-built-a-user-interface-with-epaper-and-back-lit-leds-for-our-iot-hardware/ Tue, 07 Mar 2023 15:11:36 +0000 https://goliothblogdev.wpenginepowered.com/?p=4120 Golioth's new custom hardware is an ePaper-based user interface that works with all of our reference designs. All it takes is Qwiic cable to connect to the i2c bus, and sensor readings and other information begins streaming to the face plate. Let's take a look!

The post How Golioth Built a User Interface with ePaper and Back-lit LEDs for Our IoT Hardware appeared first on The Golioth Developer Blog.

]]> Remote Zephyr development using Segger tunnel and a Raspberry Pi https://blog.golioth.io/remote-zephyr-development-using-segger-tunnel-and-a-raspberry-pi/ Tue, 22 Feb 2022 15:42:36 +0000 https://blog.golioth.network/?p=802 Your target hardware can be in a different part of the world while you develop your Zephyr app. Segger tunnel mode on the J-Link programmer means it doesn't matter if your hardware is on the desk in front of you, or back at the office.

The post Remote Zephyr development using Segger tunnel and a Raspberry Pi appeared first on The Golioth Developer Blog.

]]>