Ethernet Archives - The Golioth Developer Blog https://blog.golioth.io/tag/ethernet/ Golioth, Zephyr, and IoT Development News and How Tos Tue, 23 Sep 2025 16:29:27 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://blog.golioth.io/wp-content/uploads/2023/09/cropped-Golioth_Symbol_Coral_RGB-1-32x32.png Ethernet Archives - The Golioth Developer Blog https://blog.golioth.io/tag/ethernet/ 32 32 Bluetooth Gateways in the Field: The Globalscale GTI-RW612 https://blog.golioth.io/bluetooth-gateways-in-the-field-the-globalscale-gti-rw612/ Tue, 23 Sep 2025 16:17:22 +0000 https://blog.golioth.io/?p=10110 Golioth Connectivity enables developers to connect Bluetooth devices to the cloud using Gateways, including microcontroller based gateways. Today we’re discussing the Globalscale GTI-RW612 gateway. It’s an off-the-shelf piece of hardware normally marketed at the Matter ecosystem, but has been repurposed for Golioth Connectivity. We’ll show how we got it working sending Bluetooth device data to […]

The post Bluetooth Gateways in the Field: The Globalscale GTI-RW612 appeared first on The Golioth Developer Blog.

]]> Using the NXP FRDM-RW612 with Golioth https://blog.golioth.io/using-the-nxp-frdm-rw612-with-golioth/ Tue, 15 Apr 2025 14:11:26 +0000 https://blog.golioth.io/?p=9416 The new NXP FRDM-RW612 board comes with built-in Ethernet, and a tri-band radio. We were able to get it up and running all of the Golioth Firmware SDK sample applications in just a few hours. Here's what goes into the process.

The post Using the NXP FRDM-RW612 with Golioth appeared first on The Golioth Developer Blog.

]]> Using the NXP RT1060-EVKB Ethernet board with Golioth https://blog.golioth.io/using-the-nxp-rt1060-evkb-ethernet-board-with-golioth/ Tue, 02 Aug 2022 14:56:43 +0000 https://goliothblogdev.wpenginepowered.com/?p=2656 The NXP i.MX RT1060EVKB development platform provides a reliable and fast route for developing Ethernet solutions using Zephyr. In this post, Mike shows how to get started with the board and a Zephyr configuration.

The post Using the NXP RT1060-EVKB Ethernet board with Golioth appeared first on The Golioth Developer Blog.

]]> Zephyr does Ethernet Too! https://blog.golioth.io/zephyr-does-ethernet-too/ Thu, 19 May 2022 14:34:01 +0000 https://blog.golioth.network/?p=2122 Ethernet support is built in to Zephyr with several different chipsets to choose from. Here's how to add a W5500 Ethernet chip to your project and configure the Zephyr drivers to use it.

The post Zephyr does Ethernet Too! appeared first on The Golioth Developer Blog.

]]>