i2c Archives - The Golioth Developer Blog https://blog.golioth.io/tag/i2c/ Golioth, Zephyr, and IoT Development News and How Tos Mon, 03 Feb 2025 14:47:27 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://blog.golioth.io/wp-content/uploads/2023/09/cropped-Golioth_Symbol_Coral_RGB-1-32x32.png i2c Archives - The Golioth Developer Blog https://blog.golioth.io/tag/i2c/ 32 32 How Golioth Built a User Interface with ePaper and Back-lit LEDs for Our IoT Hardware https://blog.golioth.io/how-golioth-built-a-user-interface-with-epaper-and-back-lit-leds-for-our-iot-hardware/ Tue, 07 Mar 2023 15:11:36 +0000 https://goliothblogdev.wpenginepowered.com/?p=4120 Golioth's new custom hardware is an ePaper-based user interface that works with all of our reference designs. All it takes is Qwiic cable to connect to the i2c bus, and sensor readings and other information begins streaming to the face plate. Let's take a look!

The post How Golioth Built a User Interface with ePaper and Back-lit LEDs for Our IoT Hardware appeared first on The Golioth Developer Blog.

]]> How to use Zephyr shell for interactive prototyping with I2C sensors https://blog.golioth.io/how-to-use-zephyr-shell-for-interactive-prototyping-with-i2c-sensors/ Thu, 26 May 2022 14:44:16 +0000 https://blog.golioth.network/?p=2173 The Zephyr interactive shell makes it really easy to test out i2c devices before writing any code. This demo shows how to scan for i2c addresses, issue commands directly, and use the sensor shell to poll your devices for all sensor channels available as part of Zephyr's sensor subsystem.

The post How to use Zephyr shell for interactive prototyping with I2C sensors appeared first on The Golioth Developer Blog.

]]>