Protocols Archives - The Golioth Developer Blog https://blog.golioth.io/category/protocols/ Golioth, Zephyr, and IoT Development News and How Tos Mon, 31 Mar 2025 15:08:28 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://blog.golioth.io/wp-content/uploads/2023/09/cropped-Golioth_Symbol_Coral_RGB-1-32x32.png Protocols Archives - The Golioth Developer Blog https://blog.golioth.io/category/protocols/ 32 32 Static Asset Tracking with Bluetooth Beacons and Cellular Gateways https://blog.golioth.io/static-asset-tracking-with-bluetooth-beacons-and-cellular-gateways/ Tue, 20 Aug 2024 14:10:41 +0000 https://goliothblogdev.wpenginepowered.com/?p=7526 This is a guest post by Joey Quatela, co-owner and computer engineer at Reflow Design Co. Reflow recently worked on a Bluetooth beacon demo that works with Golioth through celluar gateways.

The post Static Asset Tracking with Bluetooth Beacons and Cellular Gateways appeared first on The Golioth Developer Blog.

]]> OpenThread Demo: From Cellular to Thread with Zephyr https://blog.golioth.io/openthread-demo-from-cellular-to-thread-with-zephyr/ Tue, 02 Jul 2024 14:56:35 +0000 https://goliothblogdev.wpenginepowered.com/?p=7392 The Golioth catalog of Reference Designs now run on Thread Networks. The Golioth Reference Design template works on top of existing

The post OpenThread Demo: From Cellular to Thread with Zephyr appeared first on The Golioth Developer Blog.

]]> The Inside Story of the Golioth Bluetooth® Mesh Demo https://blog.golioth.io/the-inside-story-of-the-golioth-bluetooth-mesh-demo/ Tue, 11 Jun 2024 16:17:45 +0000 https://goliothblogdev.wpenginepowered.com/?p=7179 Take a deeper look inside the Bluetooth Mesh demo that connects to the Cloud via Golioth. Sandra Capri of Ambient Sensors (a Golioth Design partner) walks through the code and workflow of this demo.

The post The Inside Story of the Golioth Bluetooth® Mesh Demo appeared first on The Golioth Developer Blog.

]]> Connecting a Bluetooth® Mesh Demo to the Cloud https://blog.golioth.io/connecting-a-bluetooth-mesh-demo-to-the-cloud/ Tue, 14 May 2024 14:32:24 +0000 https://goliothblogdev.wpenginepowered.com/?p=7089 Sandra Capri, CTO of Ambient Sensors, writes about building a Bluetooth Mesh demo where a cellular-based Thingy91 unit acts as a bridge to the Golioth Cloud.

The post Connecting a Bluetooth® Mesh Demo to the Cloud appeared first on The Golioth Developer Blog.

]]> Bluetooth Gateways with Golioth and Zephyr https://blog.golioth.io/bluetooth-gateways-with-golioth-and-zephyr/ https://blog.golioth.io/bluetooth-gateways-with-golioth-and-zephyr/#comments Tue, 23 Apr 2024 14:43:49 +0000 https://goliothblogdev.wpenginepowered.com/?p=6781 Turn your Bluetooth devices into a connected IoT fleet using Golioth. This post walks through the process of creating a Bluetooth to Cellular gateway and sending sensor data to the cloud.

The post Bluetooth Gateways with Golioth and Zephyr appeared first on The Golioth Developer Blog.

]]> https://blog.golioth.io/bluetooth-gateways-with-golioth-and-zephyr/feed/ 5 How To Manually Send Data to LightDB State and LightDB Stream https://blog.golioth.io/how-to-manually-send-data-to-lightdb-state-and-lightdb-stream/ Tue, 29 Aug 2023 14:46:48 +0000 https://goliothblogdev.wpenginepowered.com/?p=5035 We always recommend connecting ESP32 devices to the Golioth Cloud with the Golioth Firmware SDK. We believe that is the lowest friction way of connecting a device to the internet. But sometimes I want to get under the hood and tinker, and I thought you might like to see how that works as well. We […]

The post How To Manually Send Data to LightDB State and LightDB Stream appeared first on The Golioth Developer Blog.

]]> How to Manually Connect to Golioth with the ESP-IDF https://blog.golioth.io/how-to-manually-connect-to-golioth-with-the-esp-idf/ Thu, 21 Apr 2022 14:47:57 +0000 https://blog.golioth.network/?p=1815 Golioth communicates with IoT devices using the CoAP protocol. While our official SDK is built on Zephyr, any platform with CoAP and pre-shared key authentication can be used on the Golioth platform. Here's how to set up the ESP-IDF to work with Golioth.

The post How to Manually Connect to Golioth with the ESP-IDF appeared first on The Golioth Developer Blog.

]]> Thread network device management using Golioth https://blog.golioth.io/thread-network-device-management-using-golioth/ Tue, 05 Apr 2022 15:00:24 +0000 https://blog.golioth.network/?p=1586 Watch Golioth showcase a Zephyr-based device running OpenThread and the Golioth SDK connecting to the internet via a Border Router. Golioth manages the connection and handles data going to and from the nRF52840 based node.

The post Thread network device management using Golioth appeared first on The Golioth Developer Blog.

]]> Trying out Golioth with PlatformIO and Arduino Core https://blog.golioth.io/trying-out-golioth-with-platformio-and-arduino-core/ Thu, 09 Dec 2021 20:46:56 +0000 https://blog.golioth.network/?p=398 Note: The arduino-sdk repository showcased in this post is deprecated. GoliothLabs has two experimental repositories that may work as replacements: Golioth ESP-IDF with Arduino as a component Golioth PlatformIO/Arduino Demo In this post and associated video, we’re talking about interfacing hardware to Golioth using popular tools like PlatformIO and Arduino Core (API). Alvaro shows how […]

The post Trying out Golioth with PlatformIO and Arduino Core appeared first on The Golioth Developer Blog.

]]>